2-14
2.3.1. Address Setting
The address code of the EPTZ3000/EPTZ3000I should be set to correspond
properly with a control device to control multiple dome cameras. The address codes
are made up by the dipswitch SW1 (8 bits) on the PCB board. The 8 bits dipswitch
indicates the binary coded of the address, and there are 256 addresses can be
selected (0 ~ 255, 2
8
= 256). It also means that there are up to 256 dome cameras that
can cascade on the RS-485 bus. The dipswitch setting and the indicated address are
represented in the following chart.
Note:
The factory default address is 1.
Notice:
Please make sure the power is off before setting, and restart the
EPTZ3000/EPTZ3000I to enable a new value after changing.
SW1
ON
1234
5678
CPU
ON
123
45678
SW2
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
P
rot
o
c
ol
BA
UD
