Analogue IR speed dome series
17
EPTZ860 Speed Dome Camera Wall Mount Simple Installation
1. Screw the top housing to bracket by using a hexagon wrench.
2
.
Put the waterproof silicon pad on top of the bracket base for waterproof purpose.
3. Connect the cable you detached from base board to the RS485 cable, Power cable and video
cable you thread from the wall or ceiling. RS485 cable has to be connected via a terminal block. If
you need to connect alarm cable, thread the alarm cable through the second hole.
Note:
Since
video cable and power cable are bare wires, installers have to prepare their own BNC connector
and power cord connector.
Waterproof silicon pad
Bracket base
