ES2446-51
4
Front Panel
Note 1
: The SFP ports are shared with normal RJ-45 ports 1,2,3 and 4. For example:
The RJ-45 Port 1 can not be used when SFP Port 1 link up.
Note 2
: Click the Reset button for 5 seconds, the system configuration will be reset
to default.
2.3
LED Indicators
The LED Indicators present real-time information of systematic operation status. This
table provides description of LED status and the meaning.
Table 1-1
LED Indicators
LED
Status
Description
Power
On
Power on
Off
Disconnect to Power Source
Link/ ACT
On
Link
Flashing
Data activating
Off
No device is attached
PoE
On
Port is linked to Power Device
Off
No Power Device is connected
2.4
Rear Panel
The 3-pronged power plug is placed at the rear panel of the switch right side
shown as below. This is reserved for AC Power Input.
