manualshive.com logo in svg

EverFocus EPOE24, User Manual

Share
Download
EverFocus EPOE24 User Manual Download Page 10

                                               

ES2446-51

 

5 

 

2.5

 

  Hardware Installation 

The switch is usually mounted in the 19” rack, the rack is usually installed in IT 
room or other secured place. The switch supports AC power input and 
rackmount mounting. Make sure all the power cables, Ethernet cables, screws 
and the air circulation are well prepared and installed as below description. 

The port 1~24 are the copper ports, it requests UTP/STP cable. These port are 
also PoE ports, choose CAT 5/5E or above for the PoE application. 

The port 1~4 are the combo SFP ports, shared with the copper port 1~4. Please 
purchase the suitable fiber transceiver from your supplier and connect the fiber 
cable for the link. 

Ethernet cable

 

Request

 

The wiring cable types for data transmission are as below.   

10 Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (Max. 100m) 

100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m)   

1000 Base-T: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m) 

The wiring cable types for data transmission and power delivery in any speed 
are Cat. 5 or above. 

SFP Installation 

While install the SFP transceiver, make sure the SFP type of the 2 ends is the 
same and the transmission distance, wavelength, fiber cable can meet your 
request. It is suggested to purchase the SFP transceiver with the switch provider 
to avoid any incompatible issue. 

The way to connect the SFP transceiver is to Plug in SFP fiber transceiver fist. 
The SFP transceiver has 2 plug for fiber cable, one is TX (transmit), the other is 
RX (receive).    Cross-connect the transmit channel at each end to the receive 
channel at the opposite end.   

PD Installation plan 

When planning the PD installation, please share the PD load to the different 
ports. 

Internal Power Supply 1: Maximum 130W for Port 1~8 + System (max. 20W) 

Internal Power Supply 2: Maximum 130W for Port 9~16 

Internal Power Supply 2: Maximum 130W for Port 17~24 

You can check the power consumption of the PD device or check the Web GUI 
of the switch to see the percentage of the power usage of the ports. 

Rackmount Installation 

Attach the brackets to the device by using the screws provided in the Rack 
Mount kit.

 

Mount the device in the 19

‟

 rack by using four rack-mounting screws provided 

by the rack 

manufacturer. 

 

 

 

Summary of Contents for EPOE24












































Reviews:

No comments

Brands by name

Popular brands

Load more brands