ENVR8304E-8CH
9
3.
Basic Connection
The instructions below describe the basic connection for ENVR8304E-8CH
Power Cord
Main Monitor
(HDMI)
Main Monitor
(VGA)
Web Remote
Client
PowerVideo
Plus
(CMS)
Network
Line Level
Audio In
Line Level
Audio Out
IP Cameras 1 ~ 8
Mouse &
EKB200 Keyboard
1
2
3
4
5
6
7
8
1. Using the supplied Power Cord, connect one end to the 100-240 VAC~ port on the NVR and
the other end to the 100-240 VAC~ power outlet.
2. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
3. Connect the IP cameras to the 1~8 camera ports using RJ-45 CAT5 10/100Mb Ethernet cables
without separate power sources. Please see
2.3.1 Camera Connection
for more details.
4. To manage the NVR over network, use a standard RJ-45 CAT5 10/100/1000Mb Ethernet cable
to connect the WLAN port of the NVR to the network. Please refer to
2.5 Connecting the NVR
to the Network
.
5. Connect the LAN port of the NVR to the Uplink port using the supplied RJ-45 CAT5
10/100/1000Mb Ethernet cable. Please see
2.3.1 Camera Connection
for more details.
6. Optionally connect a mouse or a keyboard (EKB200) to the NVR to control the system. You
can also control the system using the supplied IR Remote Controller.
7. Connect a microphone to the Audio-in RCA socket of the NVR. Note that the microphone
with a (built-in) amplifier and external power supply is required.
8. To listen to audio of video source, connect a speaker to the Audio-out RCA socket. Note that
the speaker with a (built-in) amplifier and external power is required.
