EN310 4“ Touch Screen Test Monitor
30
Call Position: Tap the left and right arrow buttons to select a preset number (1~128) and
then tap
Call Position
to go to the preset position.
•
If
UTC
is selected, configure the below settings:
Coaxitron: Tap the left and right arrow buttons to select between
PTZ
and
Menu
. If Menu is
selected, you can enter the camera OSD menu by using the direction and enter icons. Note
that for AHD cameras, if PTZ is not working, select PTZ-2 as AHD camera has two kinds of
order.
Address: Tap the left and right arrow buttons to select the address (0~254). The Address
must be consistent with the address set up on the camera.
Horizontal Speed: Tap the left and right arrow buttons to select a speed (0~63).
Vertical Speed: Tap the left and right arrow buttons to select a speed (0~63).
Set Position: Move the camera to a position, tap the left and right arrow buttons to select a
preset number (1~128) and then tap
Set Position
to set up the preset position.
Call Position: Tap the left and right arrow buttons to select a preset number (1~128) and
then tap
Call Position
to go to the preset position.
Set: Tap to display the setup window.
•
Focus Info: This function is only available for TVI/CVI/AHD cameras. Tap to enable (Open) or
disable (Off) the show focus info function on the screen.
•
Lens Simulation: This function is only available for TVI/CVI/AHD cameras. You can select
Lens size and CCD chip size for the current camera.
•
Photo Storage: Tap to automatically (Auto) or Manually (Manual) store the snapshot images
to the internal SD card in png format. If Auto is selected, the snapshot images will be
automatically stored to the internal SD card with a given file name. If Manual is selected, the
snapshot images will be automatically stored to the internal SD card, however, users will
have to manually input a file name (alphabetic or numeric characters).
•
Video Storage: Tap to automatically (Auto) or Manually (Manual) store the video recordings
to the internal SD card in mp4 format. If Auto is selected, the recording file will be
automatically stored to the internal SD card with a given file name. If Manual is selected, the
recording file will be automatically stored to the internal SD card, however, users will have
to manually input a file name (alphabetic or numeric characters) before start using the
function.
