EverFocus EMV1200 HD User Manual Download Page 52

Page: 52 / 247

EMV800 HD / EMV1200 HD Mobile DVR

3.1.2

OSD Root Menu

Right-click the mouse, the OSD Root Menu window appears.

Click on any icon to enter to the setup menus.

Click the

button on the top-right corner or right-click to close the OSD Root Menu.

3.1.3

Field Input Options

You may found the following fields in the Configuration menu. Follow the instructions below
to configure the settings.

Text Box:

Click on the box and an on-screen keyboard will appear.

On-Screen Keyboard:

Click on a button to input that character. The buttons on the right and

bottom have the following functions:

Caps

Switch to capital letters

←

Delete the letter backwards

Confirm the selection

Move to left

Move to right

Space

Enter a space

Summary of Contents for EMV1200 HD
























































































































































































































































Search results

Summary of Contents for EMV1200 HD

Reviews:

Brands by name

Popular brands

EverFocus EMV1200 HD, User Manual

Search results

Summary of Contents for EMV1200 HD

Reviews:

Brands by name

Popular brands