13
•
Installing the Camera(s) and Monitor
The DVR is typically connected to one camera that is installed inside the car. Other cameras can also be installed
in different locations in the car (for example, use a waterproof camera on the outside of the vehicle). A typical
monitor’s
power supply would usually connect to the car’s cigarette-plug adapter. For installation procedures,
please refer to the guides that came with the camera(s) and monitor(s) you purchased.
The monitor and all cameras must be purchased separately.
•
Connecting the Camera(s) and a Monitor
Connect the Video Output cable of each camera to a corresponding BNC-Female connector (marked “VIN”) that is
attached to the supplied D-Sub harness adapter.
Connect the Audio Output cable of each camera to a corresponding RCA-Female connector (marked “AIN”) that is
attached to the supplied D-Sub harness adapter.
Adjust each camera according to your requirements (usually by hand and via an OSD menu displayed on an
attached monitor).
The EMV200S/EMV400S gives you the option of attaching one monitor to it. If you want to install a monitor in the
vehicle, attach the
monitor’s
Video and Audio Input cables to the BNC-Female and RCA-Female connectors
marked “VOUT” and “AOUT”. You can use this monitor to view all the feeds from your attached cameras – one at
a time or simultaneously.
LCD Monitor
LCD Monitor
