eIVP-CFS-IV-V0004
35
3.3
Ignition Control
eIVP-CFS-IV-V0004 provides ignition power control featuring for in-vehicle applications. The
built-in MCU monitors the ignition signal and turns on/off the system according to pre-defined
on/off delay periods.
3.3.1
Adjust Ignition Control Modes
eIVP-CFS-IV-V0004 provide 16 modes of different power on/off delay periods adjustable via
SW5 switch. The default dip switch is set to 0 in ATX/AT power mode.
The modes are listed in below table :
Deep Switch
Position
Power on delay
Power off delay
Switch Position
0
ATX/AT mode (Default)
1
No delay
No delay
2
No delay
5 seconds
3
No delay
10 seconds
