EHD930F eZ.HD Vandal Dome Camera
7
3. Installation
3.1 Installation and Adjustment
1.
To remove the Cover Cap, unscrew the three
Set Screws
using the supplied
Hexagon
Wrench
.
2.
For Ceiling Mount / Wall Mount users: Stick the
Template Plate
on the position where you
want to attach the camera, drill four holes on the
Template Plate
for screwing the
Adapter Plate
with the supplied
Screws
and
Plastic Anchors
. If you wish to run the wires
through the wall / ceiling, drill an additional hole in the middle circle position. Otherwise
you can wire the cables from the side of the camera (refer to the arrow position). Insert
the supplied four
Plastic Anchors
into the holes.
