3
2.
To mount the camera to the surface:
a.
Remove the
Base Plate
from the camera. To do so, 1) Remove the
Fix
Screw
2) Slightly push the
Base Plate
backward from the Fix Screw side
and then pull out the Base Plate. Screw the
Base Plate
to the surface using
the supplied 4
Screws
.
b.
Open the Camera Cover to remove the old desiccant bag from the Camera
Body and stick the supplied
Desiccant Bag
inside the Camera Body. It’s
highly recommended to replace the desiccant bag every time when you
open the Camera Cover.
c.
For the first time installation, check whether the camera is properly
focused. If not, you can optionally adjust camera zoom and focus by
adjusting the Zoom Screw or Focus Screw using a slotted screwdriver.
Note:
Please screw back the Camera
Cover immediately in case of reducing
the absorption capacity of the desiccant
bag inside the camera body.
