Stainless Steel 2MP/3MP/4MP Network Cameras
4
EDN288MS / EDN368MS / EDN468MS:
To find the SD Card Slot and the Reset Button on the camera module, remove the camera cover
using the supplied Hexagon Wrench. After inserting the SD card, be sure to place the supplied
Desiccant Bag inside the module and then tightly screw back the camera cover.
SD Card Slot
Reset Button
Desiccant Bag
EZN288MS / EZN368MS / EZN468MS:
To find the SD Card Slot on the camera module, use the supplied Hexagon Wrench to unscrew the 4
screws on the rear side of the camera and then slowly pull out the camera module. After inserting
the SD card, place a Desiccant Bag inside the module, put the module back to the housing and then
tightly screw back the module. The Reset Button is on the cable.
Note: There is already a Desiccant Bag placed inside the camera module before shipping. It’s
recommended for users to prepare a Desiccant Bag and place it inside the camera module every
time when you pulled out the camera module from the housing.
SD Card Slot
Desiccant Bag
Reset Button
