ED910/930 eZ.HD Indoor Dome Camera
8
Important Notice
Please be noted the camera
Base Plate
may loosen when you take out the camera from the pack. It
is because the Base Plate is attached to the
Camera Body
without locking tightly in order to simplify
the installation procedure.
Base Plate
Camera Body
The Base Plate is unlocked to the Camera Body.
1.
Stick the
Template Plate
on the position where you want to attach the camera, drill the
three holes on the
Template Plate
for screwing the camera with the supplied
Screws
and
Anchors
, and the circle in the middle only if you want to wire the cables through the wall
/ ceiling (the “Line out” mark represents the factory wiring position).
2.
Insert the supplied three
Anchors
into the holes.