ED310e Indoor Dome
10
4.2.8 NEXT:
↲
Enter MAIN MENU, page 2.
4.2.9 EXIT:
↲
Exit OSD to select the option list.
4.2.10 SAVE ALL:
When you change the OSD menu settings, before leaving the OSD item option SAVE
ALL. Press ENTER key to change the memory settings for the OSD.
4.2.11 DAY/NIGHT
：
AUTO / DAY / NIGHT / EXT1 / EXT2 selectable.
DAY/NIGHT: AUTO
AUTO
BURST
：
ON/OFF
DELAY CNT
：
000~255
DAY
NIGHT
：
000~255
NIGHT
DAY
：
000~255
BURST
：
Select whether or not to output the burst signal when Night status has been
identified.
DELAY CNT
：
Set the Night/ Day identification transfer time (Default: 4Sec.).
DAY
NIGHT
：
Set the threshold for identifying the Night status from the Day status.
NIGHT
DAY
：
Set the threshold for identifying the Day status from the Night status.
DAY/NIGHT: DAY
Day mode forcibly
DAY/NIGHT: NIGHT
Night mode forcibly
Night
BURST
：
ON/OFF
IR OPTIMIZER
：
ON/OFF
MODE
：
CENTER/AUTO
LEVEL
：
00~31
BURST
：
Select whether or not to output the burst signal.
IR OPTIMIZER
：
The IR Optimizer function makes it possible to minimize this
overexposure by optimizing the exposure control during Night
operations.
MODE
：
Set the IR OPTIMIZER operating mode.
LEVEL
：
Adjust the reference level of the IR Optimizer (Default: Level 5).
