Operation – Using the Pump
16
Step One: Assess wind conditions and clear work area.
Before you decide to spray, you must determine whether wind conditions are suitable. You must
also restrict access to the work area to ensure the safety of bystanders.
WARNING
Do not spray if wind speeds are greater than 4 MPH or if there are bystanders in the
intended spray area.
1. Assess wind
speed
Assess weather conditions to ensure that it is not too windy to spray.
DO NOT SPRAY if wind speeds are greater than 4 MPH.
Visible indication of wind speed
:
If leaves are in constant motion or there is any branch movement, DO
NOT spray because the wind is too strong.
2. Clear work area
Clear the work area of all bystanders and pets.
Restrict access by the public for the period recommended on chemical
label.
Step Two: Operate the pump.
WARNING
ALWAYS wear personal protective equipment as directed on the chemical label when spraying.
Long pants and sleeves, chemical-resistant gloves, and eye protection are strongly
recommended. Additional protective gear may be required depending on the particular
pesticide.
1. Review
safety
information
Review the “Operation – Important Safety Information”
related to
Chemical Application Safety provided in this manual.
2. Wear
personal
protective
equipment
Wear personal protective equipment as directed on the chemical label.
3. Turn on
power
Turn on the power to the pump.
Note: The pump will start automatically when power is turned on. The
pump will cycle on and off as needed to retain pressure in the hose.
