19
interference to radio communications.however ,there is no
guarantee that interfance will not occur in a particular
installation.If this equipment does cause harmful interfance to
radio or television reception which can be determined by
tuming the equipment off and on,the user is encouraged to try
to correct the interfance by one or more of the following
measures:
z
Reorient or relocate the receiving antenna.
z
Increase the sepration between the equipment and
receiver.
z
Connect the equipment into an outlet on circuit
different from that to which the receiver is connected.
z
Consult the dealer or an experienced radio /TV
technician for help.
Use of shielded cable is required to comply with Class B limits
in Subpart B of the FCC Rules.
Do not make any changes or modifications to the equipment
unless otherwise specified in the manual.if such changes or
modifications should be made, you could be required to stop
operation of the equipment.
FCC Radiation Exposure Statement
This eqipment comply with FCC radiation exposure limit set
forth for an uncontrolled environment.
End user must follow the specific operating instructions for
satisfying RF exposure compliance.
This transmitter must not be co-located operating in
20
conjunction with any other antenna or transmitter.
