background image

3F01-INS-LAB-RevB13 • Traveler L3 User Manual 

9

4  HANDLING TIPS

The Everest & Jennings Traveler L3 has been designed and engineered 
to perform as a stable and well balanced unit when used for its intended 
purpose. However, it is possible to tip the Traveler L3 over if it is used 
improperly. We urge you to learn the characteristics of your wheelchair. 
It is most important to learn safe methods to perform the daily activities 
basic to your lifestyle. Consult your medical professionals for assistance 
in developing the skills and proper techniques to perform all activities 
safely.

BALANCE

Proper balance is the key to maintaining the stability of your wheelchair. 
Reaching, bending, and transferring to or from a wheelchair will change 
the weight distribution and center of gravity of you and your wheelchair. 
When performing such activities, do so as instructed in the following 
paragraphs to avoid tipping the wheelchair.

TRANSFER ACTIVITIES

 WARNING: Always ensure that the wheelchair is on a stable, 

level surface and engage wheel locks before transfer.

 WARNING: Do not step on the footplates; this could cause the 

wheelchair to tip. Fold them up, and either detach them, or 
swing them aside.

 WARNING: There is a critical moment when there is little or no 

seat platform beneath you. Take every precaution to reduce this 
unsupported distance before you attempt transfer.

Transferring into or out of a wheelchair is a very difficult maneuver. 
Exercise extreme care when transferring without the aid of either an 
attendant or a patient lift. Consult your physician, nurse, or physical 
therapist for assistance in developing your individual technique. Make 
sure that the wheelchair is stabilized, and will not move or slide during 
the transfer. Take extra precaution to prevent tipping. Use good body 
mechanics to prevent personal injury.

Summary of Contents for Traveler L3

































Reviews: