background image

15

GF0500075RevA05

Handrims

Inspect for rough or sharp edges; inspect all hardware 

✓ 

✓ 

Seat Rail Guides

Make sure all required guides are present 

✓ 

 

Spokes

Inspect for broken or bent spokes; check for tightness 

✓ 

✓ 

Tires

Inspect for surface wear and cracks 

✓ 

 

Check pneumatic tires for proper air pressure 

✓ 

✓ 

Upholstery

Inspect for rips, tears, worn spots and excessive slack 

✓ 

 

Inspect attaching screws for sharp edges or stripped screws 

✓ 

 

Wheels/Wheel bearings

Inspect for wear and check alignment 

✓ 

 

Make sure axle nut and bearing tension are correct 

✓ 

 

Wheel Locks

Make sure locks are easy to engage and locking assembly is secure 

✓ 

✓ 

Ensure locks do not interfere with tires when rolling 

✓ 

✓ 

Inspect hardware for looseness or signs of wear 

✓ 

✓ 

Cleaning

Clean and wax all parts 

 

 

Clean upholstery 

 

 

Inspect Initially

Inspect Weekly

Inspect 

Monthly

✓ 

✓ 

✓ 

 

✓ 

✓ 

✓ 

 

✓ 

✓ 

✓ 

 

✓ 

 

✓ 

 

✓ 

 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 

 

 

 

 

✓ 

 

✓ 

 

✓ 

 

✓ 

 

✓ 

 

✓ 

 

 

 

 

 

MAINTENANCE GUIDE

Summary of Contents for Everest Jennings





















Reviews: