Folding Wheelchair Adaptor: Set-Up Instructions
STEP 1: Getting Started
A. Separate tubing
B. Slide HITCH on to one side of tubing. Slide tubing
back together.
C. Open Knobs and remove Tube Shims.
STEP 2: Securing Adaptor to Your
Wheelchair
A. Clip Tube Shims onto horizontal tubing. Do NOT
use Tube Shims if tubing 1-1/8” in diameter.
B. Slide center bar to width of wheelchair and close
clamps over wheelchair tubing.
C. Secure clamps by lifting knob into slot and
tightening.
D. Move hitch so it is perfectly centered between
tubes.
B
TM
A
A
D
C
B
C