4
EASY DECISION
INSTALLATION INSTRUCTIONS
1.
Install the hook bracket once the installation height is determined. Install the inside
chimney bracket above the hook bracket.
2.
Attach the glass canopy to the rangehood body.
3.
Attach the assembled V-flap and expansion pipe the to rangehood body. Fix the
expansion pipe with cable ties.
4.
Attach the rangehood to the hook bracket.
5.
Install the outside chimney bracket onto the outside chimney with 2pcs ST4*8mm screws. Ensure that
the inside chimney can move inside freely. After adjusting the height, fix the body with 2 pcs ST4*30mm
safety screws. Put the two chimneys together onto the rangehood body and lead the expansion pipe to
your outlet.
6.
Adjust the height of the inside chimney to a suitable height. Fix the inside chimney to the inside
chimney bracket with 2pcs ST4*8mm screws.
NOTE
: The two safety vents are positioned on the back housing, with a diameter of 6mm.
NOTE
: Remove all protective plastic coatings from the stainless steel surfaces before use.
