WARNING!
It is dangerous to open the door when washing, as hot water could spray outside the
dishwasher and scald you.
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
The buzzer of the dishwasher will sound for 8 seconds, only in this case the programme has ended.
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and will improve the drying process.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
Turning On the Appliance
Change the Program...
Forgot to Add a Dish?
the machine will resume after 10 seconds.
off the main power and water supply before calling for service assistance.
If you open the door during washing, the machine will pause. When you close the door ,
.
If all the lights begin to glimmer, that indicates the machine is out of order, please turn
.
NOTE:
NOTE:
At the End of the Wash Cycle
14
Premise:
You can modify the washing program in the initial stages of the cycle .
If the detergent has already been released, the appliance may have
already drained the wash water. If this is the case, the detergent dispenser must be
refilled (see the section entitled " Loading the Detergent " ).
Hold down
Entitled " Starting a wash cycle".
1
2
the button of desired program more than 3 seconds until it's Indicator is on , after
10 seconds the machine will resume.
The program lights show the state of the dishwasher:
a) All program lights off---------------stand by
b) One of the program lights on----------pause
c) One of the program lights blinking----- run
and press START/PAUSE button , the machine will resume after 10 seconds.
If you open the door
, the machine will pause. When you close the door ,
during a wash cycle
NOTE:
Premise:
A cycle that is underway can only be modified if it has only been running for a short
time. Otherwise, the detergent may have already been released, and the appliance may
have already drained the wash water. If this is the case, the detergent dispenser must
be refilled (see the
section
3(B) entitled “Function of Detergent” ).
When you hold the start/reset
b
utton
more than 3 seconds, you can cancel the running
programme and select other programmes (see the section entitled " Starting a wash cycle. . . " ).
1
2
A forgotten dish can be added at any time before the detergent cup opens.
Load the forgotten dishes.
Close the door, press START/PAUSE button the dishwasher
will resume again after 10 seconds.
Wait 10 seconds before opening the door.
2
Press the Start/Pause button to stop the dishwasher.
1
3
4
