776-3758
Rev. 07/21/14
AlwAys reAd ANd KeeP iNstructioNs
before usiNg tHis eQuiPMeNt
sPrAy guNs creAte flyiNg PArticles.
AlwAys weAr sAfety goggles ANd
breAtHiNg APPArAtus (users ANd
bystANders). flyiNg PArticles cAN
cAuse iNJury
do Not eXceed 43 Psig
soMe PAiNt PArticles ANd dust creAted by Power sPrAyiNg, sANdiNg, sAwiNg, griNdiNg, drilliNg,
ANd otHer ActiVities coNtAiNs cHeMicAls KNowN to cAuse cANcer, birtH defects or otHer
reProductiVe HArM. soMe eXAMPles of tHese cHeMicAls Are:
• LEAD FROM LEAD-BASED PAINTS,
• CRYSTALLINE SILICA FROM BRICKS AND CEMENT AND OTHER MASONRY PRODUCTS, AND
• ARSENIC AND CHROMIUM FROM CHEMICALLY-TREATED LUMBER.
your risK froM tHese eXPosures VAries, dePeNdiNg oN How ofteN you do tHis tyPe of worK.
to reduce your eXPosure to tHese cHeMicAls: worK iN A well VeNtilAted AreA, ANd worK witH
APProVed sAfety eQuiPMeNt, sucH As tHose dust MAsKs ANd otHer breAtHiNg APPArAtus tHAt
Are sPeciAlly desigNed to filter out MicroscoPic PArticles.
Specifications
Fluid Orifice ..............................................1.4 mm
Air Inlet ...................................................1/4" NPT
Max. Air Inlet Pressure .........................36-43 psig
Avg. Air Consumption .............................14.5 CFM
Nozzle Pressure ........................................ 10 psig
Cup Size ....................................................600 ml
776-3758
HVLP GRAVITY FEED SPRAY GUN AND CUP WITH
AIR PRESSURE REGULATOR
WARNING
WARNING
