Rev. 06/13/18
776-0232
1
Specifications
Free Speed: ...................................20,000 RPM
Collet : .......................................................1/4
"
Exhaust: ........................................Rear Exhaust
Air Inlet: ..............................................1/4
"
NPT
Min. Hose Size: ......................................... 3/8
"
Avg. Air Consumption: ..........................2.8 CFM
Weight: ............................................. 1.08 Lbs.
Length: .................................................... 6.18
"
776-0232
RIGHT ANGLE DIE GRINDER
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic
particles.
WARNING
WARNING
RATED RPM OF ACCESSORY
USED MUST EXCEED THE
MAXIMUM TOOL RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE
PROTECTION
ALWAYS WEAR HEARING
PROTECTION
ALWAYS WEAR HAND
PROTECTION
ALWAYS WEAR FACE
PROTECTION
AVOID PROLONGED EXPOSURE
TO VIBRATION
RPM
RPM
RPM
