background image

2.3  Timer Operation

The MP-7499 has two timers that can be set for up to 99 seconds. These timers will always display the 

same time. Use 

SET

1

 or 

SET

2

 to set the two different timers according the following example.

Example: Set TIMER 1 to 45 seconds

1. Time must be set to OUT by pressing 

IN

OUT

. If timer is set to IN (timer is counting), TIMER 2 cannot 

be set until TIMER 1 counts down to 0.

2. Press 

SET

1

.

3. Press 

4

 

 5

 then press 

 

ENTER

.

4. Repeat steps for TIMER 2 using the 

SET

2

 button.

To start the timer, press 

IN

OUT

. To stop the timer,  press 

IN

OUT

 again.

To reset a timer, press 

RESET

1

 or 

RESET

2

. The respective timer will reset to original set time.

The MP-7499 counts down by default. To change the timer to count up, stop the timer and press 

UP

DOWN

.

If a time other than the original time is needed, follow the following example.
Example: Timer is stopped at 23 seconds, but needs to be reset to 24 senconds.

1. Swith the TIME to OUT by pressing 

IN

OUT

.

2. Press 

EDIT

 then 

 2

 

4

 then press 

 

ENTER

.

3. Swith the TIME to IN by pressing 

IN

OUT

 when time is resumed.

If the game time remaining is less than the delay of game time, press 

BLANK

 and the TIMER LEDs on 

the MP-7499 will turn off. NOTE: The timer on on the LCD screen of the console will continue to count 

down.

    

Summary of Contents for All American Scoreboards MP-7499









Reviews: