background image

 

 

For Professional Technical Support call 1-844-241-5521 

 

 

 

Safety Information (continued) 

 

 

CAUTION:

 

Know the pump and its applications, 

limitations, and potential hazards. 

 

 

 

CAUTION:

 

Periodically inspect the pump and system 

components to ensure the pump suction screen is free of 
mud, sand, and debris. Disconnect the pump from the 
power supply before inspecting.

 

 

 

 

CAUTION:

 

Follow all local electrical and safety codes, 

along with the National Electrical Code (NEC). In addition, 

all Occupational Safety and Health Administration (OSHA) 
guidelines must be followed.

 

 

 

 

IMPORTANT:

 

Ensure the electrical power source is 

adequate for the requirements of the pump.

 

 

 

IMPORTANT:

 

Before using the pump, check the hose 

for holes or excess wear, which could cause leaks, and 
ensure the hose is not kinked or making sharp angles. A 

straight hose allows the pump to move the greatest 
amount of water quickly, and also check that all hose 

connections are tight to minimize leaks. 

 

 

 

IMPORTANT:

 

This pump is made of high-strength, 

corrosion-resistant materials. It will provide trouble-free 

service for a long time when properly installed, 
maintained, and used. However, inadequate electrical 

power to the pump, dirt, or debris may cause the pump to 
fail. Please carefully read the manual and follow the 

instructions regarding common pump problems and 
remedies.

 

 

 

Warranty 

 

The manufacturer warrants the products to be free from defects in materials and workmanship for a period of one year from date of 
purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If within one 
year this product is found upon examination by the manufacturer to be defective in materials or workmanship, the manufacturer’s only 
obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the 
product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. Your original receipt of 
purchase is required to determine warranty eligibility. 

The purchaser must pay all labor and shipping charges necessary to replace the product covered by this warranty. 

This Limited Warranty does not cover products which have been damaged as a result of an accident, misuse, abuse, negligence, alteration, 
improper installation or maintenance, or failure to operate in accordance with the instructions supplied with the products, or operational 
failures caused by corrosion, rust, or other foreign materials in the system. 

Requests for service under this warranty shall be made by returning the defective product to the manufacturer as soon as possible after the 
discovery of any alleged defect. The manufacturer will subsequently take corrective action as promptly as reasonably possible.  

The manufacturer does not warrant and especially disclaims any warranty, whether express or implied, of fitness for a particular purpose, 
other than the warranty contained herein. This is the exclusive remedy and any liability for any and all indirect or consequential damages or 
expenses whatsoever is excluded. 

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty 
lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other 
rights which vary from state to state. 

For Professional Technical Support call 1-844-241-5521 or visitFor warranty registration please go to

 

www.gppumpsus.com

 

 

 

 

 

 

 

Summary of Contents for ZE00804











Reviews: