Everbilt 1004181632 Use And Care Manual Download Page 4

 

HOMEDEPOT.COM 

 

 

Please contact 1-844-251-7446 for further assistance. 

Warranty (continued) 

 

This limited warranty is in lieu of any other warranties, express or implied, including any implied warranty of 
merchantability or fitness for a particular purpose, or otherwise, and of any other obligations or liability on the seller’s part. 
This limited warranty does not cover non-defect damage, damage caused by improper installation, or care (including but 
not limited to abuse, misuse, failure to provide reasonable and necessary maintenance, or dismantling or for reinstalling a 
repaired or replaced product or component). 

Under no circumstances shall the manufacturer be liable for consequential, incidental, or special damages arising in 
connection with the use of, or inability to use this product. In no event shall manufacturer’s liability for breach of warranty, 
breach of contract, negligence or strict liability exceed the cost of the product covered hereby. No person is authorized to 
assume for us any liability in connection with the sale of this product. Some states do not allow limitations on implied 
warranties and the exclusion or limitation of consequential, incidental, or special damages, so the above limitation or 
exclusion may not apply to you. This limited warranty gives you specific legal rights and you may also have other rights 
which vary from state to state. 

Contact the Customer Service Team at 1-844-251-7446 or visit HOMEDEPOT.COM. 

Pre-installation 

 

APPLICATION 

□  This submersible utility pump is designed for use on swimming pool covers. Its automatic design allows the pump 

to be left plugged in without monitoring. The pump will shut off by itself once the water has been removed. Do not 
leave the pump plugged in and outside when freezing temperatures are expected, as it will damage the pump. 

□  If the pool cover base is removed, the pump is also designed for general water removal applications. It can 

automatically drain or remove water from the following: flooded areas, window wells, low spots in yards or other 
areas that collect water, clogged sinks, water basins, boats, stock tanks, etc. 

□  This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. 

o

 

It is designed to pump rain water from pool covers, not chlorinated pool water.  

□  This pump should not be used as a replacement for a sump pump. 
□  It is not engineered to be run continuously as a “fountain” or “waterfall” pump, or in any other water re-circulation 

process.  

TOOLS REQUIRED 

 

PACKAGE CONTENTS 

Part 

Description 

Pump 

Pool Cover Base 

3/4 in. Garden Hose Adapter  

Pool Cover Base Screws 

Phillips 
screwdriver 

Summary of Contents for 1004181632











Reviews: