Instruction manual for SINLINE PRO 10000 series power supply units
2010/08/24
www.ever.eu
36
INSTALLING AND CONFIGURING POWERSOFT PERSONAL
Installing on a Windows system
Before installing the PowerSoft software, you should:
•
uninstall your current version of PowerSoft and other monitoring software (if the
user is replacing an emergency power supply unit that protects his PC),
•
if you are installing a power supply unit that communicates with the PC by
means of a USB connection, the USB cable should be disconnected from the
PC. The installation wizard will
inform you of the necessity of connecting the
communication cable.
In order to install PowerSoft on a Windows system (the list of operating
systems on which the application has been successfully tested may be found on
www.ever.com.pl)
,
just activate the programme and perform the steps prompted.
During installation, you should select the model of the power supply unit that is
connected to the PC
on which the software will be installed. This setting can also be
modified when the application is active.
In the case of a power supply unit that communicates with the computer over a
USB link, when the installation of PowerSoft Personal is completed, the installer will
ask you to
connect the USB cable to the PC. The operating system will inform that
new hardware has been found and propose the installation of a driver. Select the
option to install a driver from a specific location on the first screen, and on the next
screen indicate the PowerSoft installation catalogue (usually
C:\Program
Files\PowerSoft
) to be searched. In the next step, the operating system will
automatically find and install the appropriate driver.
In the case of Windows Vista, the operating system will not automatically initiate
driver installation from the disk. Once the USB cable is connected to the computer,
open the control panel from the start menu and select system properties. In the list of
equipment find the USB bus branch (usually, it is an open branch) and select the
emergency power supply unit. Through device properties (accessed by right-clicking
the icon with your mouse) update the device driver, proceeding in accordance with
the screen prompts. As the driver location, select the PowerSoft installation
catalogue (typically
C:\Program Files\PowerSoft
).
In order to uninstall the PowerSoft software, just select the PowerSoft – Uninstall icon
under the appropriate item in the Start menu. You can also uninstall the programme
from the "Add/remove programmes" application in the control panel.
Installing on a Linux/Unix system
The binary version of the application for Linux/Unix systems is delivered in the
following forms:
CentOS, RedHat, Suse Linux, Fedora Core
For CentOS, RedHat, Suse Linux and Fedora Core, the software is delivered in the
form of an RPM package. You can install the software using any package manager in
the installed system. If you are using a command line,
the software will be installed
once you type in the following command:
Summary of Contents for SINLINE PRO 10000
Page 1: ......
