EVER POWERLINE 31 UPS Range Operating Manual
2016-01-15 13:16
Technical Support, tel.: +48 61 6500 400
www.ever.eu
24
COMMUNICATION WITH EXTERNAL
MANAGEMENT/CONTROL SYSTEMS
COMMUNICATION USING RS 232
POWERLINE UPS units have extensive management options. The user can use the
RS 323 interface. In order to ensure proper communication, the UPS unit must be
connected to a free port on your PC, with the supplied communication cable. After
connecting the cable switch the UPS unit on, start the PC and install the software, as
described in the instruction manual or following the prompts of WinPower installer.
The up-to-date software and the installation procedure is available at
www.ever.eu
.
SNMP/HTTP NETWORK MANAGEMENT CARD
The network management card is optional and can be installed by the user in
service. This card is an electronic circuit used to integrate the UPS unit with an
Ethernet-type computer network. The network card is mounted in the special slot on
the back wall of the UPS unit. By using a network card the user is able to control the
UPS unit from any computer in the network. This arrangement is most typically used
for a central power supply system, or whenever there is a requirement to provide
remote control for the power supply system (for instance in cases where there is a
considerable distance between the server room and the location of the UPS unit).
More information on the management card can be found in the manual supplied with
the card.
Summary of Contents for POWERLINE 31 series
Page 1: ......
