8
TROUBLESHOOTING
：
LED
Status
Description
GEL
Green
GELBatteryCharging
WET
Green
Flooded, WET battery Charging
AGM
Green
Sealed, AGM, VRLA & Calcium Battery
Charging.
20%
Green 20%capacitycharging.
80%
Green 80%capacitycharging.
100%
Flash
TestModeorreconditioncharging.
100%
ON
Fullycharged,maintainingthebattery.
Fault
ON
Outputshort–circuitor reversepolarity.
Fault
Flash
BatteryisDefective or capacityis toolarge
100%
ON
2LEDsarelightingtogether.Batteryisovervoltage.
Fault
Flash
Problem
Error
Code
Possible
Causes
Suggested Solution
Charger
Does Not
Work?
No
Indicator
lights on
-No AC
Power
- Check AC connections
and make sure Power
Point is switched ON
No DC
Output?
Fault
RED LED
is ON.
-Output is
short
circuited
-Reverse
polarity
connection
to Battery
- Check DC connection
between charger and
battery and make sure
they are not short
circuiting.
- Check that the crocodile
clips / ring terminals are
connected to the correct
polarity.
No
Charging
Current?
Fault
RED LED
is
flashing
-Battery is
severely
sulphated
-Overheat
protection
mode
- Move battery & Charger
to cooler environment
No
Charging
Current?
FULL &
Fault
RED LED
are
flashing
-Battery
voltage is
higher
than
charger
rate
voltage
- Check the battery
condition.
Battery may need
replacement.
Long
Charging
Time,
Full LED
Does Not
Turn On?
Fault
RED LED
is
Flashing
-Battery
capacity
too large
-Battery is
defective
- Check the charger
specification to match the
battery capacity.
- Battery cannot be
charged and must be
replaced.
