SINLINE series UPS – Instruction Manual
2010/01/26
www.ever.eu
3
INTRODUCTION
Thank you for purchasing the EVER SINLINE UPS (UPS). It belongs to the latest
series of state-of-the-art power supply devices designed to work with servers, small
computer networks, as well as Tower- and Rack-type workstations. When operating
in the battery mode, the UPSs of this series generate sinusoidal current at their
output thanks to the Clear Digital Sinus (CDS) system and offer the feature of remote
control of operating parameters via RS232 serial port.
Sinline series UPS were designed to meet all your expectations in terms of protection
against power loss. The UPSs were manufactured in Poland and their structure
conforms with requirements of the CE symbol.
GENERAL INFORMATION
PURPOSE OF THE POWER SUPPLY
SINLINE series UPSs are LINE-INTERACTIVE-class devices designed to work with
equipment powered by monophase ~230V mains. In battery module operation mode
they generate true sine wave voltage at their output. This enables a much wider
range of tolerated loads when compared with power supply devices using
approximation of the sinusoid. UPSs belonging to this group may power virtually any
device whose power does not exceed the nominal power of the UPS. SINLINE UPSs
do not switch off automatically even when there are no devices connected to the
outlet sockets, so they may even power devices with extremely low power
consumption. Load power of these UPSs is limited only at the upper extreme and
the overload status is communicated visually, acoustically and via the PC software
monitoring the device. Unlike quasi-sine wave UPSs, the SINLINE-series battery
modules may power devices with induction motors.
WARNING! SINLINE UPSs were not designed to work with medical
equipment, in particular life and/or health support devices.
Summary of Contents for Sinline 1200
Page 1: ......
