I
increase the delay
rebuild.
See rebuild
wait for safe. See wait for safe
INL symbol - in line
in config level 1inline
setting power up mode 14
INP symbol - input attenuation
does not affect AES/EBU level 20
in config level 3audio
adjust input attenuation 14
when first installing. See input attenuation
input attenuation/level control
adjustable in config mode 14
does not affect AES/EBU levels 20
when first installing unit 6
input audio. See audio inputs
inputs
basic remote control. See basic remote control
optional remote control
general information 24
OFF (disable input) 24
J
jumper for tests
startup sequence analysis 33
L
L1 symbol - left 1
in config level 4processing
selecting source for processor input 15
LED
3 digit display. See display
bar graph. See bar graph
LEF symbol - left
in config level 4processing
selecting source for processor input 15
level meters
on front panel 2
use of 5
LIV symbol - live (0 delay)
in config level 1inline
setting up run mode 14
in config level
6RE
mote
set up RCC command input 24
set up RCC output signal 25
live
RCC input command 24
RCC output signal 25
lock
digital audio. See AES/EBU: operation: out-of-lock condition
password protect. See configuration: password: use of
log of errors. See Error Log
LOG symbol - log
error log, in config mode 16
in config level 5error
display fatal error log 15, 16
loopback cables
startup sequence analysis 33
M
maximum delay. See full delay
maximum length 16
modes of operation 8
motherboard status LEDs
used during startup 33
MUT symbol - muting audio
in config level
6RE
mote
set up RCC command input 24
set up RCC output signal 25
mute
controlled by RCC 25
RCC input command 24
RCC output signal 25
N
NO SUCH FUNCTION
displayed during startup 33
NO symbol
in config level 5error
clearing fatal error log 15
NO symbol - no password
in config level 1inline
setting the config password 14
number of digits. See display digits
O
O P symbol - oscillator and pause
in config level 4processing
while adjusting oscillator selection 14
OFF symbol - off
in config level 1inline
setting display digits 14
OFF symbol - output off
in config level
6RE
mote
set up RCC output signal 25
ON symbol - on
in config level
6RE
mote
set up RCC output signal 25
open collector drivers
using optional remote card 23
OSC symbol - oscillator. See oscillate
in config level 4processing
select processing mode 16
select rebuild method 14
oscillate
explcontrol of 16
oscillator and pause
adjustable in config mode 14
OUT symbol - output attenuation
affects AES/EBU levels 20
explanation of 16
in config level 3audio
adjusts output attenuation 14
out-of-lock. See AES/EBU: operation: out-of-lock condition
output attenuation
adjustable in config mode 14
does control AES/EBU levels 20
explcontrol of 16
output audio. See audio outputs
outputs - rear panel
general information 24
