www.event-lighting.com.au
8
Beat
The Speed fader or Tap Sync button can be used to record a beat.
To record a beat using the Speed fader:
1.
Play back the scene to be assigned the beat.
2.
Press
Park
until the yellow LED indicating Mix Chase is lit.
3.
Press and hold
Mode Select/Rec Speed
and tap the Channel Flash button of the scene
that is playing back.
To disable a beat recorded using the Speed fader:
1.
Play back the scene the beat is to be removed from.
2.
Press
Park
until the yellow LED indicating Mix Chase is lit.
3.
Move the Speed fader to the lowest position.
4.
Press and hold
Mode Select/Rec Speed
and tap the Channel Flash button of the scene
that is playing back.
To record a beat using Tap Sync:
1.
Play back the scene to be assigned the beat.
2.
Press
Tap Sync
3.
Press
Tap Sync
again once the desired time has passed. The time between pressed will
be shown on the display.
4.
If necessary, repeat step 3 until the correct timing is achieved.
To disable a beat recorded using Tap Sync:
1.
Move the Speed fader.
Fade
The Fade fader sets the time each step takes to fade in and out. The maximum fade time is 10
minutes. The minimum is instant. Fade time cannot be recorded as part of a scene.
Single Chase
Cycle through all enabled scenes. The speed is determined by Sound Activation, Speed fader or
Tap Sync.
To use Single Chase mode:
1.
Press
Park
until the red LED indicating Single Chase is lit.
2.
Move the faders for the scenes to be cycled to their desired output levels.
Mix Chase
Two or more scenes will be output simultaneously.
To use Mix Chase mode:
1.
Press
Park
until the yellow LED indicating Mix Chase is lit.
2.
Move the faders for the scenes to be cycled to their desired output levels.
3.
Adjust the output of each scene as necessary.
Other Functions
Blind/Home
Press
Blind
and a Channel Flash button to blackout that channel.
Press
Home
to restore normal functionality.
Full On
Press and hold
Full On
to change the output of all 48 channels to 100%. Release to restore
normal functionality.
Black Out
Press
Blackout
to stop all DMX output. Press again to restore DMX output.
