Event Lighting lite KONTROL48, User Manual

Page: 6 / 11

www.event-lighting.com.au
6
Record Mode
Enable Recording
Enable Record Mode to access all programming functions:
1. Press and hold Record/Shift.
2. Press the Channel Flash buttons in the following sequence: 1,5,6,8.
3. Release Record/Shift.
To exit Record Mode :
1. Press and hold Record/Shift.
2. Press Add Kill/Rec Exit . All channel indicator LEDs will flash.
3. Release Record/Shift.
Create Scene
1. Enable Record Mode .
2. Press Mode Select/Rec Speed until the green indicator for 1-24A is lit.
3. Compose the first step for the scene by moving the faders to the desired positions.
4. Press Record/Shift to save the step to temporary memory.
5. Repeat steps 3-4 until the scene is finished. Up to 999 steps can be recorded in one
scene.
6. Press Page/Rec Clr until the LED indicates the desired page to select the page in which
to save the scene.
7. Press and hold Record/Shift and press a Channel Flash button in the 13/37 – 24/48 row
to save the scene to that fader.
Play Scene
After a scene is saved, it can be played back using the fader it was assigned to.
1. Press Mode Select/Rec Speed until the green indicator for 1-24A is lit.
2. Press Page/Rec Clr to select the page the scene is saved in.
3. Move Master Fader B to its maximum position (fully down).
4. Move the Speed and Fade faders to their desired positions.
5. Move the fader for the scene to play back to the desired position. Adjust the output level
of the scene by moving the fader.
6. Move Master Fader B to adjust the total output of all scenes.
Clear Recording
If you do not wish to save the scene currently being recorded:
1. Press Record/Shift .
2. Press Page/Rec Clr . All channel indicator LEDs will flash.
3. Release Record/Shift .
Edit Mode
Enable Edit Mode to make changes to a step in a scene:
1. Enable Record Mode.
2. Press Mode Select/Rec Speed until the red indicator for Chase<>Scene is lit.
3. Press Page/Rec Clr to select the page the scene is saved in.
4. Press and hold Edit/All Rev and press the Channel Flash button corresponding to the
scene.
5. Release Edit/Add Rev . The LED corresponding to the selected scene will be lit.
To exit Edit Mode :
1. Press Record/Shift .
2. Press Add Kill/Rec Exit . All channel indicator LEDs will flash.
3. Release Record/Shift . KONTROL48 will return to Record Mode.
Delete Entire Scene
1. Enable Edit Mode for the scene to be deleted.