EVEN
GLO
Model
No.
GA201M
Page
12
Rev.
Nov/09/2010
Installation Instructions
3.
Connect a Base Bracket, using the hardware attached to it (1/4-20 x 1/2 Truss Head Bolts),
at each
set of two (2) holes located around the Base of the Heater (total of three Base Brackets). Assemble
so that the heads of the Screws are seen from the outside of the Base. The side of the Bracket with
the remaining hole should be flat against the Floor / Ground.
4.
Assemble the Pole and the Base Support Pillars together using six (6) M8-1.25 x 90 mm Hex Head
Carriage Bolts provided.
Screws
Base Bracket
Base Bracket
alfresco-heating.com
888-Warm-Glo
