EVEN
GLO
Model
No.
GA201M
Page
11
Rev.
Nov/09/2010
*
b
a
Base Cover
Base Body
As Shipped
Remove Shipped Parts
Installation Instructions
Assembly of Outdoor Patio Heater
1.
Disassemble shipped parts:
a.
Remove the Base Cover from the Base Body by unscrewing the eight (8) screws holding
the Base Cover on.
b.
Open the Door of the Base Body. Carefully cut the zip ties holding the Gas Hose
Assembly to the interior of the Base Body and remove the Burner.
*
Be Careful to “lift”
out the Burner
to avoid damage to the pilot assembly which extends from the cone shaped
Inner Shield.
2.
Connect the Wheel Mounting Bracket to the base using two (2) screws and nuts attached. Insert the
screws through the Base of the Heater into the Wheel Mounting Bracket, so the nuts are visible.
alfresco-heating.com
888-Warm-Glo
