Evenflo SONUS, Owner'S Manual

Page: 14 / 31

26 27
TOC
Rear-facing Installation with
Lower Anchor Connectors (cont.)
Rear-facing
4
Pull the seat pad off of the
front of the child restraint.
Route the Lower Anchor
Connector strap and hook
through the
rear-facing belt paths.
IMPORTANT: Make sure the
Lower Anchor Connector strap
is in front of the crotch
strap , and it lies flat without
twisting, as shown. Reconnect
the seat pad to the front of
the child restraint.
Attach the harness straps
to the splitter plate using
the infant position
(page 43 ) on the
harness straps.
As your child grows, you
can attach the harness
straps to the splitter plate
using the pockets at the
end of the straps.
2
3
IMPORTANT: Make sure both harness straps are
installed completely on the splitter plate, as shown.
Rear-facing Installation with
Lower Anchor Connectors
Make sure the harness
straps are in one of the
four lower strap slots. The
harness straps MUST start
at shoulder height or lower,
using the strap slots closest
to your child’s shoulders, as
shown.
DO NOT use the two upper harness slots rear-facing . The
harness may not properly restrain the child during a crash.
WARNING