6
7
To change position of the shoulder straps
A
, remove the
access door
B
on the back of the seat.
To install tray
A
, place one foot on the front base
B
and
align the slots beneath the tray with the armrests on the
high chair.
Pull out the one-hand tray release lever
C
under the tray
and push the tray into one of three positions. Tug on the tray
to make sure it is locked into place.
You may also use both of your hands to squeeze two release
levers
D
on either side of the tray to install it and adjust
its position.
To remove the tray
A
, pull out the one-hand tray release
lever
C
, or squeeze the two-hand release levers
D
and
remove the tray from the high chair.
A
B
C
D
C
USING THE TRAY
Fit the back of the tray liner
A
into the back of the tray
B
,
then lay down the liner and press in for a snug fit. To remove,
pull up on the front of the tray liner. The tray liner is
dishwasher-safe (top rack only).
B
A
USING THE TRAY LINER
CHANGING SHOULDER STRAP POSITION
A
B
Remove one shoulder strap
A
, at a time, then insert it in the
appropriate slot
C
in the seat back. Make sure the shoulder
strap
A
is completely through the slot, then pull it to make
sure it is attached securely. Repeat for the other shoulder
strap.
Install the access door
B
.
A
C
1
A
B
To remove the padded seat cover
A
, remove the access
door
B
on the back of the seat and remove the shoulder
straps
C
.
Remove the padded seat cover
A
to wash or replace.
To install padded seat cover, place it over the back of the seat
back.
Replace the shoulder straps, as described above.
CHANGING THE PADDED SEAT COVER
C
B
A
2
A towel rack
A
on the back of the seat can be used for bibs,
towels, or washcloths only.
Note:
Do not hang or attach any other item on the rack.
A
USING THE TOWEL RACK