15
1. Secure child restraint to the vehicle seat.
D
Child restraint is securely installed with lower
anchor connector assembly (shown at left) through
belt path
(p.
OR
Child restraint is securely installed with vehicle seat
belt through
belt path
(p.
)
D
Tether strap is attached and tightened
(p.
).
D
Locking clip is installed, if necessary (p.
2. Place the child in the child restraint.
D
The child’s back and bottom are flat against the
back and bottom surfaces of the child restraint.
D
The tops of the child’s ears
MUST
be at or below
the top of the child restraint headrest.
3. Make necessary adjustments.
D
Harness straps are snug against the child’s
shoulders, with no slack (p.
).
D
Crotch strap is properly positioned (p.
).
4. Fasten both buckle tongues.
Refer to page
5. Position and connect chest clip.
D
Chest clip
MUST
be at armpit level (p.
).
6. Check your work.
D
To properly protect the child, the child restraint
MUST NOT
move more than 25 mm (1 in) from
side-to-side or from front-to-back at the belt path.
Installation Checklist
5
-p
t Harne
ss
