20
Installation with Seat Belt
Locking Clip
installed properly.
If your vehicle is
model year 1996 or newer
, it likely has a
vehicle belt system that can be locked when tightened, and
will not require use of a Locking Clip.
Consult your vehicle owner’s manual before installing a
locking clip.
If your vehicle requires a Locking Clip, please call
ParentLink at 1-800-233-5921 (U.S.) or 1-937-773-3971
(Canada), or 01-800-706-12-00 (Mexico) to obtain a
Locking Clip and instructions on how to install and use it.
• Remove Locking Clip from vehicle seat belt when not used
with a child restraint, or the vehicle seat belt will not properly
restrain an adult or child. Serious injury could occur.
•
DO NOT
use a Locking Clip in booster mode.
5. Install Locking Clip
(not included), if
necessary.
If your vehicle was built
prior to model year 1996
,
and has a lap/shoulder
belt that is equipped with
an emergency locking
retractor (ELR) AND
sliding latch plate, you
MUST
use a Locking
Clip. Check your vehicle
owner’s manual to identify
which vehicle belt system
is in your vehicle.
13 mm
(0.5 in)
WARNING
Lap Belt Only
Lap & Shoulder Belt
4. Fasten the vehicle seat belt.
Fasten the vehicle seat belt as shown depending
on your type of seat belt.
Note:
Install locking clip on lap and shoulder belt
combinations, if necessary.
