23
IMPORTANT
Refer to the vehicle owner’s manual to determine which
type of belt retractor is in the vehicle.
LAP BELT
LAP AND
SHOULDER BELT
Pull the shoulder belt
G
tightly to remove all slack
from the lap portion of
the belt
H
, at the same
time push down on
the base using your full
weight. Check to be sure
the base is secured in the
vehicle seat.
H
G
Make sure the vehicle belt is tight. Grab the base at
the areas
I
, as shown. If you can move the base
more than 25 mm (1 in.) side-to-side or front to
back the vehicle belt is not tight enough. You will
need to try again, or find another location for your
convenience base.
3
4
F
J
I
WARNING
IMPORTANT:
Route
any excess vehicle belt
through the openings
F
, on the sides of the
base, so it
does not
interfere
with the metal
carrier retainers
J
when
attaching the carrier.
