background image

24

TOC

25

1. Remove the backrest from the booster seat. 

(See Removing the Backrest, page “Removing the 

Backrest” on page 26.)

2. Place the booster seat on the vehicle seat.
3. Set the child in the booster seat.  

Make sure the child’s back is flat against the vehicle 

seat,and the child’s bottom is flat against the booster seat.

4. Secure the child and booster seat to the vehicle seat. 

Stretch the lap/shoulder belt across the child and fasten 

the buckle. 

5. Use the shoulder belt clip, if necessary.  

If the shoulder belt does not properly lay midway 

between the child’s shoulder and neck, attach and 

adjust the belt clip (see Using the Shoulder Belt Clip, 

page “Using the Shoulder Belt Clip” on page 28).

6. Check your work.  

Make sure the lap belt is stretched low and snug across 

the child’s hips, Make sure the lap belt is stretched 

low and snug across the child’s hips, beneath the 

armrests (both Lap and Shoulder belts), and 

fastened into the buckle. The shoulder belt must cross 

the child midway between his/her shoulder and neck. 

and fastened into the buckle. The shoulder belt must 

cross the child midway between his/her shoulder and 

neck. Note: If the vehicle’s shoulder belt naturally 

crosses the child’s shoulder, you do not need to use the 

shoulder belt clip.

The shoulder belt 

MUST NOT

 cross the child’s neck or fall off 

the child’s shoulder. If you can not adjust the shoulder belt to 

properly lay midway between the child’s shoulder and neck, 

try another seating location or do not use the booster seat.

Lap Belt: Stretched 

low and snug across the 

child’s hips, beneath the 

armrests, and fastened 

into the buckle.

Shoulder Belt: Must cross  

midway between child’s  

shoulder and neck. Use  

belt clip, if necessary.

IMPORTANT

Always secure the booster seat with the vehicle seat belts 

when not occupied. An unsecured booster seat can fly into 

and injure other occupants in the event of a crash.

Installation Checklist

Child Requirements

• Weight: 18 – 45.3 kg (40 – 100 lbs)

• Height: 112 – 145 cm (44 – 57 in.) and tops of the 

child’s ears are at or below the top of the vehicle seat 

headrest.

• Age: At least 4 years old

IMPORTANT: Once your child exceeds any of the size 

requirements above, you 

MUST

 discontinue use of this seat. 

Your child may be ready for use of the vehicle belt system 

only at this time.

WARNING

Using Your Booster Seat 

without the Backrest

Summary of Contents for big kid sport


















Reviews: