6
Gate Installation
11. Adjust both upper bumpers
D
equally
until the gap between the handle
J
and latch
K
is .04 in. (1 mm) and tops
align horizontally as shown below.
12. Inspect the gate. Make sure it swings
freely and latches securely.
Full Green
Indicator
N
.
10. With your gate securely in place,
remove the cardboard cover, then cut
and discard the plastic tie.
BEFORE removing the CARDBOARD
COVER and cutting the PLASTIC TIE,
ENSURE the gate is securely in place or
serious injury may result.
WARNING
Cardboard Cover
Plastic Tie
D
J
K
D
8.
Turn both upper adjustment bumpers
D
and both lower adjustment
bumpers
D
, as shown, until all four
contact the
door frame or mounting
caps.
Check that the gate is still straight up
and down then turn each bumper two
more full rotations or until tight.
9. Test to make sure the gate frame
assembly is secure by firmly shaking it.
If it moves, it needs to be re-installed.
Repeat steps 8 – 9.
D
D
.04 in.
(1 mm)
Summary of Contents for Barn Door Walk-Thru
Page 21: ...19...
Page 31: ......
Page 32: ...www evenflo com USA 1 800 233 5921 8 AM 5 PM EST Canada 1 937 773 3971 M xico 01 800 706 12 00...
