51
50
Installing the Accessories
The Body Pillow and
Infant Head Support
For about the first three
months, a baby’s head needs
extra support.
The optional Infant Head
Support
D
should lie flat
against the seat back, as
shown. Be sure to cut off the
plastic attachment between
the head support and the
seat pad. Small parts may be
a choking hazard.
The optional Body Pillow
C
is used to help support your
child by placing it in the
restraint, as shown.
C
Use the Body Pillow and Infant Head Support with the child
restraint in the rear-facing position
ONLY
.
D
Not available on all models.
Removing the Adjustable Headrest
1
buckle
storage
buckle
storage
Unbuckle harness straps,
disconnect chest clip, and
raise BeltTrac access flap
A
.
A
DO NOT
use if the top of the
child’s ears are above the top
of the headrest at its highest
position.
Remove the headrest for this
child to use the restraint,
as long as the child meets
all other height and weight
requirements.
Fold in both sides of the
BeltTrac access flap
A
.
A
3
Remove the headrest
B
from the folded BeltTrac
access flap
A
.
2
B
A
4
Lower BeltTrac access
flap
A
and attach Velcro®.
buckle
storage
buckle
storage
A
General
WARNING
