evenes HE-HL+ 40, Manual

Page: 26 / 64

EVENES HEAT CIRCULATION PUMP
HE-HL +
26
2.5 Safety-conscious working
Observe the safety instructions detailed in this manual, along with the current national accident
prevention regulations. Should the system operator also have their own internal regulations,
these must also be observed.
2.6 Safety instructions for the operator
• Any existing touch guard protecting moving parts may be neither removed nor shut down
while the system is in operation
• In the event of a fluid leak, any fluids must be collected or diverted in a way that prevents
hazards to persons and the environment from arising
• Prevent hazards arising from electrical energy. Observe the instructions in
local or general regulations (e.g. IEC, VDE, etc.), and those of the local
energy supplier
• In the event of hazards arising from the system due to contact with hot or cold parts, these
parts must be fitted with a touch guard
• Keep flammable substances away from the product
2.7 Safety instructions for installation and maintenance work
The system operator is responsible for ensuring that all installation and maintenance work is
carried out by qualified personnel. These persons must also have familiarised themselves in
advance with the product using the operating instructions. Conducting work on the pump is
only permitted when the system is shut down.
Ensure that the device is securely disconnected from the power supply. Disconnect the device
plug to achieve this. Prescribed instructions for shutting down the device can be found in the
operating instructions. All protective mechanisms, such as a touch guard, must be correctly
reattached after work.
2 | SAFETY INSTRUCTIONS