4
EN
Dear buyer, thank you for purchasing our product.
Prior to the installation and first use of the electric water
heater, please read these instructions carefully.
This water heater has been manufactured in compliance with the relevant standards
and tested by the relevant authorities as indicated by the Safety Certificate and the
Electromagnetic Compatibility Certificate. Its technical characteristics are indicated on
the label on the bottom of the heater next to the pipes. The installation must be
carried out by qualified staff. All repairs and maintenance work within the water
heater, e.g. lime removal or inspection/replacement of the protective anticorrosion
anode, must be carried out by an authorised maintenance service provider.
INSTALLATION
The water heater should be installed in a room protected from the onset of freezing
conditions and located as close as possible to the points of use. It has to be fitted to
the wall using appropriate wall screws with a minimum diameter of 5 mm.
With regard to the needs, you can chose execution above the sink (GT 5 O; GT 10 O;
GT 15 O) or an execution under the sink (GT 5 U; GT 10 U; GT 15 U).
Dimensions of the water heater for installation and connection [mm]
Installation above the basin/sink
Installation below the basin/sink
A
B
C
D
E
GT 5 O
396
270
256 260
GT 5 U
396
144
256 260
GT 10 O 500 398
350 265
GT 10 U
500
122
350 265
GT 15 O 500 398
350 310
GT 15 U
500
122
350 310
