SECONDARY HOT WATER CIRCULATION PUMP
EV-ZUP 15 PLUS
17
EN
1.6 Transport
Unpack and check the pump and all accessories upon receipt. Report any damage sustained in transit
immediately. Dispatch the pump in the original packing only.
1.7
Electrical current
There is a danger of an electric shock when working with electrical current. Therefore:
• Switch off the power before beginning work on the pump and make sure that it cannot be switched on again
accidentally.
• Do not kink or nip the power cable or allow it to come into contact with heat sources.
• The pump is protected against drips in accordance with protection class IP 42. Protect the pump against
water spray. Do not immerse in water or other fluids.
1 | SAFETY
2 | TECHNICAL DATA
2.1
Type key
EV ZUP
Series: Standard secondary hot water circulation pump, glandless pump
15 Plus
Type designation
2.2 Connections
EV ZUP 15 Plus (Fig. 1)
Screwed connection: DN15 (1/2" IG)
2.3 Data
EV ZUP 15 Plus
Mains voltage
1 ~ 230 V / 50 Hz
Protection class
IP 42
Nominal diameter of connecting pipes
R ½
Installation length
84 mm
Max. permissible operating pressure
10 bar
Permitted fluid temperaturerange
+2°C to +65 °C,
in short-term operation to 2 hours +70 °C
Max. ambient temperature
+40 °C
Max. permitted hardness in secondary hot water
circulation systems
20° dH
See name plate or catalogue for further information.
Betriebsanleitung_Zirkulationspumpe_EV-ZUP_A6.indd 17
27.01.21 09:06
