Even Embers GAS7200AS, Owner'S Manual

Page: 7 / 43

6
LP GAS CYLINDER (TANK) PLACEMENT:
• The grill should be installed with the hose regulator
assembly extended at full length of hose directly
(24” [61cm] minimum) away from the burner. When
so confi gured, placement results in maximum
tank to grill distance. When grill is operated, the
hose / regulator and gas tank should be on a line
perpendicular to wind direction. Placing tank closer
than 24” (61cm) to grill can overheat tank and
cause release of propane through relief openings
and can result in tank fi re or explosion.
WARNING: The hose to tank attachment can result
in a potential trip hazard and tank tipping
hazard - use caution.
• Inspect propane tank valve rubber seal for cracks, wear
or deterioration prior to use. A damaged rubber seal can
cause a gas leak, possibly resulting in an explosion, fi re
or severe bodily harm.
• Inspection should be done each time propane tank is
connected to grill, has been refi lled, exchanged or has
not been used for more than 60 days.
• Do not use a propane tank with a damaged rubber
seal. Exchange tank or have rubber seal replaced at a
qualifi ed propane fi lling station.
LP GAS CYLINDER (TANK) RUBBER SEAL INSPECTION:
Good
Rubber Seal
Damaged
Rubber Seal
HOSE & REGULATOR SPECIFICATIONS AND INSTALLATION:
• DO NOT attempt to connect grill, as purchased for LP (propane) gas, to any other fuel supply
source such as a natural gas line. For dual fuel grills that can be converted to natural gas, a
3 Embers conversion kit must be purchased and installed for use with natural gas.
• DO NOT use any other pressure regulator/hose assembly other than the one supplied with your
grill. Replacement pressure regulator/hose assembly must be part No 7200-155-1201-0, which can be
obtained by contacting customer service at 855-735-9922.
• DO NOT attempt to adjust or repair a regulator. The regulator is designed to operate at a
maximum output pressure of 11 inches of water column (2.74 kPa).
• Ensure the tank valve is CLOSED prior to connecting the LP gas cylinder to your grill. Turn the
valve knob clockwise to properly close the valve. Read and follow all instructions and warnings
on the supply hose safety tags. Read and follow all warnings in this manual concerning the safe
use of LP gas cylinders and the hose and regulator before connecting cylinder to grill. Read and
follow all warnings on the LP cylinder.
WARNING
24” min
(610mm)
WIND