OMNI.EVELO.COM
10
OMNI.EVELO.COM
11
StEp 4
Place the bike upside-down. Orient the
Omni Wheel so that Side B is on the
same side as the bicycle chain.
Note:
Side B has the various electronic ports.
Lower the Omni Wheel into the fork
dropouts.
StEp 5
-
Side B
Insert
Hex Bolt (E)
through
Torque Washer (H)
. Add 1 to 3
Washers (F)
onto the
axle and install the
Torque Washer (H)
with the screw head facing the wheel.
Tighten the
Axle Nut (G)
.
Note
: the HEAD of
Hex Bolt (E)
goes toward the wheel.
If a recess exists on the outside of your fork dropout, use the provided washers to
fill the recess to provide a smooth, level surface for the
Torque Washer (H)
.
Note
: the
Torque Arm (I)
must be in contact with the fork in the position shown below.
StEp 6
-
Side A
Install 2 to 3
Washers (F)
onto the axle
of Side A. Add enough washers so that
the last washer added stands above the
surface of the fork (as in drawing A).
StEp 7
-
Side A
Install the
Torque Arm (I)
parallel to the fork
and tighten the
Axle Nut (G)
.
G
I
G
F
E
H
A Side
A
F
