EV-97 Eurostar SL Microlight Maintenance Manual GEN/EUR/04 Issue 4
29
List of parts necessary for Brake pad replacement procedure:
1. Brake pads
4 pcs
Nom.
765 210
2. Split pin
4 pcs
φ
2x14mm
Czech Stand.
021781.04
Nom.
039 300
3. Split pin
2 pcs
φ 4
x40mm
Czech Stand.
021781.04
NOM.
040 350
4. Lock tab Washer
6 pcs 6x2mm
Works Stand.
3288.2
Nom.
038 160
CAUTION
NEW BRAKE PADS REQUIRE A RUNNING-IN PERIOD TO ACHIEVE MAXIMUM
BRAKING EFFICIENCY. This should be kept in mind during taxiing and landing.
5.6.5 Bleeding
Bleed the brakes whenever they feel spongy or lose efficiency. Air can enter the system if the
brake fluid reservoir is not kept topped up or a leak occurs. Proceed as follows:
Fig. Brake system bleeding
1- Bleed screw
1. Connect a short clear plastic hose to the bleed nipple, (Item 1 in the photo)
2. Loosen the bleed nipple.
3. Step repeatedly on the pedal to bleed the brake system
4. Tighten the screw
5. Repeat several times or until the pedal offers resistance against motion (feels firm)
NOTE
If the brake efficiency remains unsatisfactory after bleeding or if the pedal
motion is excessive, fill with brake fluid and bleed the system again. Continue
until all the air is out of the system
5.7
Control Surface Deflection Setting
The neutral position of the control surfaces is used as a reference for adjustment of deflections.
1
