Daily maintenance
7
Install
Oil cup
Install cold plate
8
This range hood machine is an external exhaust type cooker hood machine, and the gas
discharged from the cooker hood machine should not be discharged into the hot flue gas
used for the discharge of smoke burning gas or other fuel.
If the range hood is installed above the gas stove, the distance from the bottom of the body
to the focal plane is at least 650mm, which should be considered if the installation instruc-
tions of gas-fired stoves provide a larger installation distance.
It is strictly forbidden to modify the product without authorization, and the power cord shall
not be replaced or modified by itself.
Please do not install the cooker hood machine on the wall of flammable material.
Do not install the cooker hood machine on the top of the stove with solid fuel.
When drilling holes in the wall, avoid electrical wires embedded in the wall to avoid electric
shock hazard.
A special power supply socket shall be used for the cooker hood machine, and the special
power outlet should be reliably grounded (the product must use 10A, 220~v or above).
The wall shall have sufficient supporting strength for the installation of the cooker hood
machine The hollow core of the hollow wall shall be greater than 30mm, and the concrete
wall can be directly punched and installed. The machine must be securely mounted on the
wall.
The cooker hood machine may have very sharp edges. Please wear protective gloves when
you install or clean the cooker hood machine.
If your kitchen is under a state of decoration, do not use cooker hood exposed, for building
materials, dust, paint, coatings and their volatile gas cooker hood surface causes corrosion
and lose luster, please install cooker hood in after the decoration.
Hold the bottom end of the oil cup with both hands
and place the oil cup horizontally. Insert the oil cup
into the holder of the oil cup holder and push the oil
cup back to the county seat.
The hands hold the cold plate, cold
plate rotation of a shaft insertion on
the guide plate hook slot, turn up,
insert the condensation plate card
buckle on the guide plate in the
booth, fixed can.
Booth
Oil cup stents
Pins
Oil cup
Condensing
boards buckle
Guide plate
Spindle
●
●
●
●
●
●
●
●
●
●
2
3
4
5
6
7
8
9
10
1
2
12
